UPDATE: 2511 (THIS MODEL) FIRMWARE UPDATE AVAILABLE HERE [memorex.com]. THANK YOU, ravioli.

Model: Memorex MVBD-2511 Blu-ray Player
SOLD OUT

NOTE: AVSForum has reported that installing the 2510 firmware upgrade (partially?) bricks the 2511 [avsforum.com]. DO NOT INSTALL THE 2510 FIRMWARE UPGRADE.


Full specs and more photos (rear outputs) can be found here:
http://www.blu-ray.com/players/pl...show=specs
Note: USB socket is on the side, near the front face of the player.

Confirmed: This model can play avi (DivX and Xvid) via USB.
See manual here: http://www.memorex.com/manuals/MV...g__QSG.pdf
Read page 37 of manual. Probably cannot play *.mkv files.

When playing DivX or Xvid avi files via USB, there is no "skip 10 minutes into the future" option,
so if you need to resume a movie from where you previously stopped, you have to fast forward at 16x speed.
This means that if you need to resume a movie from the 100-minute time point (in a 120-minute movie),
you have to hold down the fast forward button for 6 minutes. There is no 32x or 64x or 128x
fast forward option.

Unlisted specs:
Boot-up time is 45 seconds (from power-on to start of disc read)
Disc load time is 10 seconds (from start of disc read to actual disc play)

Product Features

* Progressive scan Blu-ray Disc player
* 1080p capability for higher defintiion video content
* Full HD 1080p, DVD up-conversion up to 1080p (480p, 720p, 1080i, 1080p), 24p, 60p video frame rate
* Multi-channel audio content (supports more advanced Dolby Digital Plus, Dolby TrueHD and DTS-HD)
* BD-ROM, DVD-ROM, DVD, DVD-R/-RW, DVD+R/+RW, DVD-R DL, DVD+R DL, CD-ROM, CD, CD-R/-RW
* 16:9 / 4:3 picture select
* On-screen graphical user interface
* Slow motion function (2x • 4x • 8x)
* RW/FF play function (2x • 4x • 8x • 16x)
* VFD display

Connectivity

* HDMI v1.3 digital output
* Component video output
* S-video output
* Composite video output
* Optical audio output
* Coaxial audio digital output
* Analog 7.1 channel audio output
* USB 2.0 input